Everyone

Martin Birk

Nougat

Reconnect Garmin Watch keeps the connection to your watch and reconnects the watch after being away from phone. It runs in the background and battery usage is very low.

The app requires Garmin Connect installed. NOTE: I am NOT from Garmin.

The app works for Fenix 3/5, Forerunner 235/735XT/920, vivoactive3, vivoactive HR, vivosmart HR, vivomove HR, and other models.

When you run the app the first time, it will start Setup. Please follow the instructions exactly.

Huawei phones: Please see text at the bottom

Troubleshooting:
>> On Galaxy phones, you may have to reboot the phone and force stop the "Bluetooth share" app (go to phone Settings - Applications, show system apps - Bluetooth share - Force Stop).

>> When Vivoactive HR disconnects, sometimes you have to go into Garmin Connect menu - Garmin Devices, and then turn off Bluetooth on the phone. Connect should prompt you to turn on Bluetooth again; do it and wait 10-20 sec, and then the watch should reconnect. (You should also have Location Services turned on in Android settings!)

>> Some Lenovo phones may only work if the watch BLE-ANT firmware is downgraded. You need to Google a file called something like GUP1909.BIN and upload it to the watch from a computer.

>> If the watch shows it's CONNECTED but you don't get any notifications:
* Open Garmin Connect and select Settings - Smart Notifications. Disable and enable one of the notifications, like Incoming Calls. This could make Connect ask for permissions. 
* If it keeps asking for permissions even though you gave permission then restart the phone.
-- If it doesn't ask for permissions:
* Go to your phone's Settings - Apps - Connect - Permissions and enable all permissions

Issues with Garmin Connect on some Huawei phones: 
You can try the following.
* Turn off Location Services on your phone and then try to add the watch in Garmin Connect
- OR -
* Install and run the app "Bluetooth pair"
- OR -
* Solution from fin:
https://forums.garmin.com/forum/on-the-trail/wrist-worn/fenix-3/1271446-unable-to-pair-fenix-3-with-android-7-0-phone

If you are missing notifications from Huawei phone then check app permissions for Garmin Connect:
Settings > Apps & notifications > Apps > settings (small gear sign on the bottom ) > special access > notification access: Make sure Garmin connect smart notifications is turned on.

Latest status from Garmin on this issue:
https://support.garmin.com/en-US/?faq=3qBFoCgeH428IUUfc0SpZ7&searchType=noProduct
Hubungkan kembali Jam Tangan Garmin menjaga koneksi ke jam tangan Anda dan menghubungkan kembali jam tangan setelah jauh dari telepon. Ini berjalan di latar belakang dan penggunaan baterai sangat rendah.

Aplikasi ini membutuhkan Garmin Connect diinstal. CATATAN: Saya BUKAN dari Garmin.

Aplikasi ini berfungsi untuk Fenix ​​3/5, Forerunner 235 / 735XT / 920, vivoactive3, vivoactive HR, vivosmart HR, vivomove HR, dan model lainnya.

Saat Anda menjalankan aplikasi pertama kali, itu akan memulai Pengaturan. Harap ikuti instruksi dengan tepat.

Ponsel Huawei: Silakan lihat teks di bagian bawah

Penyelesaian masalah:
>> Pada ponsel Galaxy, Anda mungkin harus me-reboot ponsel dan menghentikan paksa aplikasi "Bluetooth share" (buka Pengaturan telepon - Aplikasi, tampilkan aplikasi sistem - Bluetooth share - Force Stop).

>> Ketika Vivoactive HR terputus, kadang-kadang Anda harus masuk ke menu Garmin Connect - Perangkat Garmin, lalu matikan Bluetooth di telepon. Connect akan meminta Anda untuk mengaktifkan Bluetooth lagi; lakukan dan tunggu 10-20 detik, dan kemudian arloji akan terhubung kembali. (Anda juga harus mengaktifkan Layanan Lokasi di pengaturan Android!)

>> Beberapa ponsel Lenovo hanya dapat berfungsi jika jam tangan firmware BLE-ANT diturunkan. Anda perlu Google file bernama sesuatu seperti GUP1909.BIN dan mengunggahnya ke arloji dari komputer.

>> Jika arloji menunjukkan TERHUBUNG tetapi Anda tidak mendapat pemberitahuan:
* Buka Garmin Connect dan pilih Pengaturan - Pemberitahuan Cerdas. Nonaktifkan dan aktifkan salah satu pemberitahuan, seperti Panggilan Masuk. Ini bisa membuat Connect meminta izin.
* Jika terus meminta izin meskipun Anda memberi izin kemudian restart telepon.
- Jika tidak meminta izin:
* Buka Pengaturan telepon Anda - Aplikasi - Hubungkan - Izin dan aktifkan semua izin

Masalah dengan Garmin Connect di beberapa ponsel Huawei:
Anda dapat mencoba yang berikut ini.
* Matikan Layanan Lokasi di ponsel Anda dan kemudian coba tambahkan arloji di Garmin Connect
- ATAU -
* Instal dan jalankan aplikasi "Bluetooth pair"
- ATAU -
* Solusi dari sirip:
https://forums.garmin.com/forum/on-the-trail/wrist-worn/fenix-3/1271446-unable-to-pair-fenix-3-with-android-7-0-phone

Jika Anda kehilangan notifikasi dari ponsel Huawei maka periksa izin aplikasi untuk Garmin Connect:
Pengaturan> Aplikasi & pemberitahuan> Aplikasi> pengaturan (tanda roda gigi kecil di bagian bawah)> akses khusus> akses pemberitahuan: Pastikan pemberitahuan pintar Garmin connect dihidupkan.

Status terbaru dari Garmin tentang masalah ini:
https://support.garmin.com/en-US/?faq=3qBFoCgeH428IUUfc0SpZ7&searchType=noProduct

Reconnect Garmin Watch keeps the connection to your watch and reconnects the watch after being away from phone. It runs in the background and battery usage is very low.

The app requires Garmin Connect installed. NOTE: I am NOT from Garmin.

The app works for Fenix 3/5, Forerunner 235/735XT/920, vivoactive3, vivoactive HR, vivosmart HR, vivomove HR, and other models.

When you run the app the first time, it will start Setup. Please follow the instructions exactly.

Huawei phones: Please see text at the bottom

Troubleshooting:
>> On Galaxy phones, you may have to reboot the phone and force stop the "Bluetooth share" app (go to phone Settings - Applications, show system apps - Bluetooth share - Force Stop).

>> When Vivoactive HR disconnects, sometimes you have to go into Garmin Connect menu - Garmin Devices, and then turn off Bluetooth on the phone. Connect should prompt you to turn on Bluetooth again; do it and wait 10-20 sec, and then the watch should reconnect. (You should also have Location Services turned on in Android settings!)

>> Some Lenovo phones may only work if the watch BLE-ANT firmware is downgraded. You need to Google a file called something like GUP1909.BIN and upload it to the watch from a computer.

>> If the watch shows it's CONNECTED but you don't get any notifications:
* Open Garmin Connect and select Settings - Smart Notifications. Disable and enable one of the notifications, like Incoming Calls. This could make Connect ask for permissions. 
* If it keeps asking for permissions even though you gave permission then restart the phone.
-- If it doesn't ask for permissions:
* Go to your phone's Settings - Apps - Connect - Permissions and enable all permissions

Issues with Garmin Connect on some Huawei phones: 
You can try the following.
* Turn off Location Services on your phone and then try to add the watch in Garmin Connect
- OR -
* Install and run the app "Bluetooth pair"
- OR -
* Solution from fin:
https://forums.garmin.com/forum/on-the-trail/wrist-worn/fenix-3/1271446-unable-to-pair-fenix-3-with-android-7-0-phone

If you are missing notifications from Huawei phone then check app permissions for Garmin Connect:
Settings > Apps & notifications > Apps > settings (small gear sign on the bottom ) > special access > notification access: Make sure Garmin connect smart notifications is turned on.

Latest status from Garmin on this issue:
https://support.garmin.com/en-US/?faq=3qBFoCgeH428IUUfc0SpZ7&searchType=noProduct

Reconnect Garmin Watch

Versi Terakhir dari Reconnect Garmin Watch

Versi lain